Magnetic Drilling Machine

TTDM100

---

Techinical Specification:

	Metric	Imperial
Annular cutting	Ø 12 - 100 mm	Ø 1/2" - 4"
Twist drilling	Ø 1 - 31.75 mm	Ø 1/16" - 1 1/4
Countersinking	Ø 10 - 105 mm	Ø 3/8" - 4 1/8
Tapping	M3 - M30	Ø 1/8" - 1 3/16
Length	365 mm	14 3/8"
Width	310 mm	12 3/16
Height	515 - 715 mm	20 1/4" - 28 1/8"
Stroke	260 mm	10 1/4
Weight*	31 kg	68.3 lbs
Magnet (l x w x h)	220 x 110 x 64 mm	8 11/16" x 4 5/16" x 2 1/2"
Magnetic force	3,000 kg	6,615 lbs
Motor power	1,900 W	17.3 A
Total power	2,050 W	18.6 A
Speed (no load)	(I) 42 - 110 rpm
	(II) 65 - 190 rpm
	(III) 140 - 400 rpm
Speed (load 1,900 W, 17.3 A)	(I) 85 rpm
	(II) 152 rpm
	(III) 270 rpm
	(IV) 480 pm
Spindle (Weldon)	MT3 19.05 mm	MT3 3/4"
Voltage	110 - 120 V / 60 Hz
	220 - 240 V / 50 - 60 Hz

*Without power cord and handles

Benefits:

• Four-speed gearbox.
• Morse Taper 3 spindle with integrated tool cooling and lubrication.
• Strong dual coil CNC machined 2-way magnet, causing the machine to use less energy, generate less heat and therefore lasts longer.
• Reduced risk of damaging or hurting machine, tools, workpiece and operator.
• Suitable for use in areas and workplaces where power supply is of less quality.
• Reduced risk of armature damage.
• Reduced risk of control unit(s) damage.
• Timely service notfication to avoid additional cost by unexpected downtime or unnecessary part replacement.

TTPM100

---

Techinical Specification:

	Metric	Imperial
Annular cutting	Ø 12 - 100 mm	Ø 1/2" - 4"
Twist drilling	Ø 1 - 31.75 mm	Ø 1/16" - 1 1/4
Counter sinking	Ø 10 - 105 mm	Ø 3/8" - 4 1/8
Tapping	M3 - M52	Ø 1/8" - 2 1/16"
Length	497 mm	19 9/16"
Width	375 mm	14 3/4"
Height	628 - 890 mm	24 3/4" - 35 1/16"
Stroke	260 mm	10 1/4"
Travel distance	X-axis 50 + 65 mm	X-axis 50 + 65 mm
	Y-axis 120 mm	Y-axis 120 mm
Weight*	55 kg	121 lbs
Magnet (l x w x h)	220 x 220 x 64 mm	8 11/16" x 8 11/16" x 2 1/2"
Magnetic force	4300 kg	9,480 lbs
Motor power	1,900 W	17.3 A
Total power	2,200 W	20 A
Speed (no load)	(I) 42 - 110 rpm
	(II) 65 - 190 rpm
	(III) 140 - 400 rpm
	(IV) 220 - 620 rpm
Speed (load 1,900 W, 17.3 A)	(I) 85 rpm
	(II) 152 rpm
	(III) 270 rpm
	(IV) 480 pm
Spindle (Weldon)	MT3 19.05 mm	MT3 3/4"
Voltage	110 - 120 V / 60 Hz
	220 - 240 V / 50 - 60 Hz

*Without power cord and handles

TTDM200

---

Techinical Specification:

	Metric	Imperial
Annular cutting	Ø 12 - 200 mm	Ø 1/2" - 7 7/8"
Twist drilling	Ø 1 - 44 mm	Ø 1/16" - 1 3/4"
Countersinking	Ø 10 - 205 mm	Ø 3/8" - 8 1/16"
Length	480 mm	18 7/8"
Width	260 mm	10 1/4"
Height	660 - 840 mm	26" - 33 1/16"
Stroke	180 mm	7 1/16"
Weight	53 kg	116.8 lbs
Magnet (l x w x h)	330 x 110 x 63 mm	13" x 4 5/16" x 2 1/2"
Magnetic force	3,900 kg	8,600 lbs
Motor power	3,600 W	32.7 A
Total power	3,800 W	34.5 A
Speed (no load)	(I) 70 - 150 rpm
	(II) 170 - 410 rpm
Speed (load 3,600 W, 32.7 A)	(I) 70 - 150 rpm
	(II) 170 - 410 rpm
Spindle (Weldon)	MT4 31.75 mm	MT4 1 1/4"
Voltage	110 - 120 V / 60 Hz
	220 - 240 V / 50 - 60 Hz

*Without power cord and handles

Benefits:

• Two-speed gearbox.
• Integrated tool cooling and lubrication tank and fluid level indication
• Integrated safety strap and lifting shackle
• High-precision tubular rail balancer system
• Progressive feed assist
• Morse Taper 4 spindle
• Strong triple coil CNC machined magnet