Logo For Tritorc Equipments Pvt Ltd

Pipe Cutting Machine - TSF Series

Pipe Cutting Machine - TSF Series

1 / 3
pipe cutting & bevelling machine
2 / 3
pipe cutting & bevelling machine
3 / 3
pipe cutting & bevelling machine

Catalogue

Features

Tritorc’s TSF Series is designed for a wide range of pipe cutting and beveling operations, providing a robust solution for industries like oil and gas, petrochemical, and construction. The split-frame design allows the machine to be mounted around the outer diameter (OD) of the pipe. Which makes a secure and stable clamping. With the ability to cut and bevel simultaneously, the TSF Series allows precise results. It supports various bevel types, including J-Bevels, with automatic feeding for faster operation. Available in multiple models, the TSF Series accommodates pipe sizes from 2" to 72" with different wall thicknesses.

  • Split frame design for easy assembly and disassembly
  • Simultaneous cutting and beveling for precise finishes
  • Low axial and radial clearance for tight spaces
  • Auto-feed for consistent and efficient cutting
  • Modular tool slides for customizable operations
  • Flame-free and spark-free cutting for safe operations
  • Supports Standard Bevel, Compound Bevel, and J-Bevel pipe ends
  • Available with pneumatic, hydraulic, and electric drive options
Drive Options: Pneumatic, Hydraulic & Electric
Air Requirement: 100 CFM @ 0.7/0.8Mpa
Hydraulic Requirement: 2-60L per min. @12.5Mpa
Power Supply: 380-440V, 3Phase, 50/60Hz
Electric Requirement: 220-240V 1PH 50/60HZ

Why Use Tritorc's TSF Pipe Cutting Machine

Below is the interactive Three Dimensional Model and the advantageous features that Tritorc's TCL Pipe Cutting Machine provide.

flame & spark free
Spark Free/ Flame Free

In conditions where spontaneous combustion is a concern the Cold Cutting Tools are a chosen Option. Fully enclosed bearings help for an additionally safe and durable operation.

better gramophonic serrated surface finish
Better Finish

The finish offered by the Cold Pipe cutting machine is better than the same operations being carried out by Gas cutting, Plasma Cutting, or Angle Grinder Cutting

Pipe Cutting & Bevelling Machinhe
pipe cutting & bevelling machine
Bevelling And Cutting Done Simultaneously

Tritorc's automatic pipe cutting machines have tool posts that can allow for usage of cutting tool bits that can perform cutting and bevelling at the same time.

better mobility
Better Mobility

The lightweight aluminium/steel alloy body of the portable pipe cutting and bevelling machine with its Split Frame Tool Body allows for the machine to be moved around in narrow spaces before pipe cold cutting.

pipe cutting & bevelling machine

Who We Are

Get in Touch

Enter your first name
Enter your last name
Enter a valid email address
Enter Country Code
Enter your last name
Enter your company name
Enter your required Product
Yes
By clicking Get A Quote I confirm that I have read and agree to the Privacy Statement.
This is a required field

Frequently Asked Questions

Pipe Cutting Machine - TSF Series

pipe cutting & bevelling machine

Note: The Dimensional Data relevant to the diagram above is available in the catalogue.

The TSF Series can accommodate pipes ranging from 2" to 72" in diameter, depending on the model.

The machine operates with pneumatic, hydraulic, and electric drive options. Electric versions require 380-440V, 3-Phase, 50/60Hz, while pneumatic and hydraulic models require specific air and hydraulic pressure.

Yes, the TSF Series is designed to simultaneously cut and bevel, resulting in efficient and precise finishing.

The TSF Series supports Standard Bevel, Compound Bevel, and J-Bevels.

Yes, the TSF Series is ideal for heavy-wall pipes and can handle varying wall thicknesses, offering stable performance with low noise.

The TSF Series is designed with a split-frame system for quick disassembly and assembly, making it portable and easy to transport for on-site operations.

Pipe Cutting Machine Specification

There are many variations of Pipe Cutting Machine available, choose your required Pipe Cutting Equipment. When you ask for a quotation, be rest assured of the best heavy duty pipe cutter prices. Select the machine suited to your requirement from our product brochure.

Model No Range Machine ID Machine OD Thickness Height Weight
inch mm mm mm mm kg
TSF-6 2-6 184 324 70 80 38.3
TSF-8 2-8 238 378 70 80 40.5
TSF-10 4-10 292 432 70 80 49
TSF-12 6-12 343 483 70 80 55.8
TSF-14 8-14 373 513 70 80 57
TSF-16 10-16 422 562 70 80 60.8
TSF-18 12-18 482 622 70 80 64.2
TSF-20 14-20 526 666 70 80 68.9
TSF-22 16-22 578 718 70 80 70.1
TSF-24 18-24 34 774 70 80 77.3
TSF-28 22-28 739 923 92 83 128.7
TSF-30 24-30 799 983 92 83 134.8
TSF-36 30-36 958 1142 92 83 147.3
TSF-42 36-42 1108 1292 92 83 166.5
TSF-48 42-48 1258 1442 92 83 180
TSF-56 48-56 1473 1657 92 83 185
TSF-60 54-60 1573 1763 95 94 211
TSF-66 60-66 1729 1916 93.5 94 224
TSF-72 66-72 1867 2054 93.5 94 237.3

Testimonials

"Thank you for an opportunity to speak on this. Let me tell you that SP Shingla has been constructing bridges, but the rail bridges were the first experience for us with bolted structures. Now it was a great challenge for us to get the required torque. We tried many machines but they did not give us the proper output at all. Then I came across your machines and ordered them. The machines, I found them to be very good due to their output. As the bolts were to be tightened, in the ground as well as at site at height around 20 m. For the open joints, yes hydraulic torque machines were very good.I will just tell you about my experience that I use other machines, but your machines are very good and I am really very happy about it."
"Sr. Project manager, M/s SP Singhla Construction Pvt. Ltd."
"Hello, everyone. Good Evening, first of all I would like to congratulate Tritorc on being the market leaders in solutions providers for bolts and all. And I also thank Tritorc for giving me this opportunity to speak on this dais. So being MTHL, which is India’s longest Sea bridge. It is a tough task, so while starting the project we ended up building some temporary access bridges. So we were dealing with somewhere around 5,00,000 bolts. And apart from that we are dealing with 45,00,000 to 50,00,000 bolts in our whole project, so we were very much in need of experts. So what L&T sees Tritorc is not only as a service provider, but we see them as a solution provider. So Whenever we are stuck with some bolting operations, we call Tritorc. So coming to Tritorc they have a manufacturing facility in Mumbai. So the Service is provided on time, I mean if you face any problem, they are here within no time whenever you raise your concerns."
"Manager L&T Mumbai Trans Harbour Link Project"
"Thank you very much to Tritorc, for giving me this opportunity. We are from Bhavani Erectors Pvt. Ltd. And mainly we are erecting boilers in thermal power plants and as of now in India we are currently erecting Ten Projects and all are bolted structures, while some projects have welded structures but mostly now new projects which are upcoming have bolted structures. So we have used Tritorc machines on our project at the Chhabra Thermal power plant, here we were working on unit no 6 with 5,00,000 to 6,00,000 bolts and the Tritorc machines we used were very good and the service provided was good as well. We have purchased 6 to 8 machines and our overall experience was very good. We have purchased two machines for the NTPC, Dadri Project and have further purchased 3 to 4 machines for our Tamil Nadu, Udangudi Project. Our business with Tritorc goes back 3 to 4 years. I will further purchase machines if more contracts are received by us. So all the best to Tritorc. My experience with Tritorc is very good."
"Manager Project Planning, M/s Bhavani Erectors Pvt. Ltd."
"Since we were work on a Global scale, we decided to have an annual rate contract, we have chosen Tritorc as our rate contract partner for L&T. Whatever site we achieve in India we have Tritorc, simply we have to just pick a call and tell them the requirement. Now after having done this we are spreading globally, we are starting our operation in middle east, there also I am sure we will extend our relation with Tritorc. This may not be relevant but I want to highlight what I have seen in Tritorc is that they are very committed. I remember one case in August 2017, there was flood in Mumbai. And we were working in IOCL Mathura and immediate mobilization was required so we had Mr. Shahrukh and Mr. Lavin, they took a personal interest, and even the train services were disturbed there. So within 48 hours they mobilized their equipment at site and provided us a very good support. They have very professional behavior, they do not compromise on quality and safety so probably that is the reason and of course the back bone is Naresh Purswani, who is any way my own friend, I have known him from more than 30 years and all and He has acted as a back bone of Tritorc."
"Larsen & Toubro."
Footer | Tritorc